└ Module: Module:IC2
Energy Loaders are used to provide an interface between the IndustrialCraft2 Energy Net and Energy Carts. They possess a number of advanced features unique to IC2 machines. By default they input and output at 512 EU/t. When one of the selected options triggers, it sends out a redstone current allowing for launch from a holding or boarding rail.
The recipes below are broken. Replace Detector - Energy with a hopper.
Will use Stone Pressure Plate if Detectors are unavailable.
Will use Stone Pressure Plate if Detectors are unavailable.
The Lapotron Loader Upgrade is a custom upgrade added by Railcraft. It adds 1,000,000 EU extra storage to any Energy Loader/Unloader in which it is installed. It does not upgrade the storage of any other IC2 machine, only Energy Loaders/Unloaders. You may not put more than 9 in a Loader/Unloader.
See: Crafting Guide
The Overclock Upgrade increases the transfer rate between Energy Loaders/Unloaders and Energy Carts at the cost of efficiency. The rate increased by 30% per upgrade, energy usage by 50%. More than ten upgrades has no effect.
See: Crafting Guide
The Storage Upgrade increases the Energy Loaders/Unloaders storage capacity by 10,000 EU per upgrade.
~Insert Pic Here~ See: Crafting Guide
The Transformer Upgrade increases the input/output voltage of the Energy Loaders/Unloaders to 2048 EU/t. Only one upgrade is required. Improper handling can result in an explosion.
~Insert Pic Here~ See: Crafting Guide